Quick Engineering Answer: How the R Series (R110–R300 & Q340) Scales Across Facade & Landscape Tasks
The Radiant Honor R Series is a unified private-mold architectural flood and spotlight family spanning 12W to 200W across ten housing diameters, divided into two mechanical base groups: the compact D69mm base group (R110, R120, R135) for 12W–36W close-to-medium accenting, and the heavy-duty D116mm three-cable-entry base group (R150 through R300 and Q340) for 36W–200W long-throw facade and pole projection. Every model supports dual optical platform choices: larger D37 (Φ37mm, 4° narrow spot) lenses for high-candela long throw, or higher-density D24 (Φ24mm, 6°–60°) lenses for higher wattage and smooth beam blending.
Complete R Series & Q340 Master Engineering Parameter Table
| Model & Spec Page | Nominal Power (D37 / D24 Config) | Fixture Dimensions (Φ × H mm) | 3535 LED Array Layout (D37 vs D24) | Optical Beam Angles | Base Group & Typical Throw Distance |
|---|---|---|---|---|---|
| R110 | 12W – 15W (up to 18W) | Φ120 × H175 mm | D37: 4 LEDs | D24: 6 LEDs | 4° (D37) / 6°–60° (D24) | D69mm Small Base · 4m – 12m |
| R120 | 18W (up to 24W) | Φ131 × H183 mm | D37: 4 LEDs | D24: 9 LEDs | 4° (D37) / 6°–60° (D24) | D69mm Small Base · 6m – 15m |
| R135 | 24W (up to 36W) | Φ148 × H194 mm | D37: 4 LEDs | D24: 12 LEDs | 4° (D37) / 6°–60° (D24) | D69mm Small Base · 8m – 18m |
| R150 | 36W (up to 48W) | Φ164 × H265 mm | D37: 6 LEDs | D24: 18 LEDs | 3°/4° (D37/45) / 6°–60° (D24) | D116mm 3-Cable Base · 10m – 22m |
| R170 | 48W (up to 60W) | Φ190 × H303 mm | D37: 9 LEDs | D24: 24 LEDs | 3°/4° / 6°–60° | D116mm 3-Cable Base · 12m – 26m |
| R200 | 60W (up to 100W) | Φ222 × H311 mm | D37: 12 LEDs | D24: 24 LEDs | 3°/4° / 6°–60° | D116mm 3-Cable Base · 15m – 32m |
| R225 (R220) | 80W (up to 120W) | Φ247 × H331 mm | D37: 16 LEDs | D24: 36 LEDs | 3°/4° / 6°–60° | D116mm 3-Cable Base · 18m – 38m |
| R260 | 100W (up to 150W) | Φ284 × H350 mm | D37: 20 LEDs | D24: 48 LEDs | 3°/4° / 6°–60° | D116mm 3-Cable Base · 22m – 45m |
| R300 | 120W (up to 200W) | Φ325 × H367 mm | D37: 24 LEDs | D24: 60 LEDs | 3°/4° / 6°–60° | D116mm 3-Cable Base · 25m – 55m+ |
| Q340 (R340) | 150W – 200W | Φ370 × H388 mm | D37: 36 LEDs | D24: 72 LEDs | 3°/4° / 6°–60° | Heavy-Duty Yoke / Base · 30m – 65m+ |
Mounting System Compatibility: Type-U, Type-A/B/C/D & Pole Clamps (Type-E/F/G)
- Type-U (Standard U-Bracket) & Type-A (Round Surface Base): Direct cornice, parapet, or ground plinth installation; R150–R300 D116mm bases accommodate three-core through-wiring for daisy-chained DMX512 or AC lines.
- Type-B (0.26m / 0.75m Stanchion Pole) & Type-C (Ground Spike): Elevates R110–R135 fixtures above shrub lines in landscape beds (see LED Garden Spike Lights).
- Type-D (Wall Extension Arm) & Type-E / Type-F / Type-G (Φ60–Φ114mm Pole Hoop & Tree Straps): Pairs with Pole & Tree Mounting Brackets, Flood Light Pole Hoop Clamps, and Pole-Mounted LED Spotlights for multi-fixture column and plaza pole rings.
Coordinating R110 Through R300 & Q340 Across Multi-Elevation Facades
Architectural lighting designers specify the private-mold R Series family specifically to eliminate visual mismatch across building tiers. On a typical five-star hotel or civic museum envelope, R110 (12W), R120, and R135 (18W–24W) units tuck discreetly onto window sills, balcony cornices, and colonnade capitals using compact D69mm bases. Stepping down to the podium plaza, R150, R170, and R200 fixtures wash mid-level pilasters, while R225, R260, R300, and rectangular Q340 projectors punch 100W–200W beams up to the roof parapet from perimeter poles via Phi 60–Phi 114 hoop clamps.
Selecting Ultra-Narrow Collimators (3°/4°/6°) vs. Elliptical Wall-Wash Lenses (15×45°)
Within the R Series optical platform, lens diameter directly governs beam collimation efficiency. Achieving tight 3° or 4° vertical blades of light along narrow window mullions or tall classical columns requires larger Φ45mm or Φ37mm single-emitter collimators so edge spill does not bleed into adjacent guestroom glass. Conversely, when washing wide spandrel panels from close horizontal setbacks, 15×45° asymmetric elliptical lenses stretch the beam horizontally across masonry joints while holding tight vertical control. Pairing narrow beams with PT-C D22 lens anti-glare caps and medium floods with PT-A/PT-B caps or deep anti-glare lens pressure plates keeps pedestrian sightlines comfortable across ground-level plazas.
Base & Cable-Routing Verification Before R Series Project Orders
When transitioning from R110/R135 single-whip connections to larger R150–R300 DMX512 daisy-chained runs, electrical contractors utilize the larger D116mm multi-cable base or external IP68 waterproof power boxes so power-in, DMX-in, and DMX-out cables pass cleanly without exposed junction tees on architectural stonework. Specifiers coordinating mixed softscape-and-facade zones can also equip R110–R170 heads with the D20 ground spike tube in adjacent planting beds while keeping Type-D wall arms and Type-E/G pole brackets on hardscape columns, preserving one unified housing aesthetic across the entire site.
During pre-tender photometric submittals, grouping R Series schedules by elevation tier—Cornice Sill Accent (R110/R135), Mid-Facade Column Wash (R150/R170/R200), and Setback Pole Projection (R225/R260/R300/Q340)—helps electrical estimators match conduit sizes, driver enclosures, and glare shields accurately before sample production begins.
Thermal Headroom, Color Bin Uniformity & Mockup Aiming Angles
When a commercial building facade mixes 18W window-reveal accents with 150W setback column floodlights, color shifts between dissimilar LED modules immediately stand out across pale limestone or travertine cladding. Standardizing on the single private-mold R Series optical platform ensures matched white-point chromaticity (across 2700K, 3000K, 4000K, or dynamic RGBW configurations) and uniform thermal lumen maintenance from podium level to roof crown. During nighttime mockups, field engineers also test aiming tilt tolerances between 45° and 75° to confirm that rear heatsink fins maintain full convection clearance above stone ledges while locking set-screws hold azimuth positions under seasonal wind gusts.
Facade schedules built around graduated R110–R300 and Q340 luminaires frequently integrate 900W High-Power LED Flood Light and 36W Pole-Mounted LED Spotlight, alongside mounting and optical guides in Understanding Beam Angles: A Guide to Architectural before finalizing tender bills of materials.
Frequently Asked Questions: R110–R300 & Q340 Architectural Floodlights
What wattage span does the Radiant Honor R Series and Q340 family cover?
The R Series scales smoothly across eight circular sizes from R110 (12W) through R135, R150, R170, R200, R225, R260, and R300 up to rectangular Q340 (200W), allowing uniform architectural styling across an entire building facade.
Which anti-glare accessories fit R Series floodlights?
R Series luminaires pair with internal D22 lens anti-glare caps (PT-A, PT-B, PT-C), deep anti-glare lens pressure plates, and external concentric radar or linear louver anti-glare rings depending on viewing geometry.
Can R Series floodlights mount onto existing round landscape poles without drilling?
Yes. Pairing R Series floodlights with Type-E or Type-G pole brackets, the D46 hoop clamp tube, and Phi 60, Phi 72, Phi 89, or Phi 114 round-pole hoop clamps enables clean circumferential pole mounting.